QS205 10in Hub Motor V3 Type

QS205 10inch 4000W Hub Motor 55H V3 Type

Motor Specification:

1. Motor Type: BLDC Hub Motor with Permanent Magnet

2. Motor design: Double axle out with 10inch rim

3. Rim size:2.15-10

4. Matching Tire: 3.0-10, 3.5-10

5. Magnet Height: 55MM

6. Pole Pairs: 16 pairs

7. Rated Power: 4000W

8. Peak Power: 7000W

9. Rated Voltage: 48V,60V,72V

10. Speed Options:

11. Max Torque: 190N.M

12. Max Efficiency: 91%

13. Max. Continious current:55A at 72V

14. Peak current:100A

15. Brake type: Disc brake or 110MM Drum brake

16. Rear Fork width for installation: 200mm

17. Winding Holder material: Aluminium

18. Cross Section of Phase wire: 10 mm2

19. Dual Groups of hall sensor with waterproof connectors(One for spare)

20. Temperature Sensor: KTY83-122

21. Max. Working Temperature: 70-120 degree, Peak 150 degree

22. Waterproof Grade: IP66

23. N.W./ G..W. : 15kgs / 16kgs

24. Package Size: 34*34*33CM

Precautions for use

1. The motor is strictly forbidden to carry with it, and it is strictly prohibited to pull the lead of the motor.

2. When installing the tire, you must be careful, handle it lightly to avoid scratches or excessive force resulting in the motor hub, end cap, electric

Damage of crankshaft and lead wire.

3. All the phase wires and the terminals of the Hall element must ensure well connect, and there must be no looseness, otherwise the motor and controller may be burned. It is strictly forbidden to connect reversely or wrongly, otherwise it will cause permanent damage to the motor.

4. A controller that matches the motor or a controller recommended by the manufacturer must be used to ensure the reliability of the motor

5 It is forbidden to disassemble the motor, change the structure, refit, etc., otherwise the warranty will be invalid, and the unpredictable

Security incident!

6. The installation of the motor and the flat fork must be firm and reliable, and the fixing screws of the shaft must be tightened without any looseness.